Hot Topics Layout Drawings Device Installation Product Application Video Teaching Software Application Secondary Development Other Guides

How to install the access controller and bolt lock on the frameless glass door?

2017-12-04 11:57

Details of the problem:

Hello, how to install the access controller and the bolt lock on the frameless glass door? Hope to get an answer, thank you

Expert answer:

Hello,there are the installation method:

1.Use UBK bracket to install. A glass door without a frame needs accessories to assist in installation. The installation method is basically the same as the surface installation method of ordinary doors, except that it is different when installing the iron plate in the third step, put the U-shaped groove, rubber cushion and stainless steel gasket (on the side of the lock screw) on the glass door, lock the glass door with a headless hexagon screw, and then fix the relay plate in the U-shaped groove on.

For different glass door thicknesses and different types of electric magnetic locks, we provide different types of installation accessories: UBK brackets.

2.Use AB bracket to install. Fix the AB frame on the glass door with glass glue (or double-sided tape), and then fix the iron plate to the bracket.

Can solve( 0 ) Can not be solved( 0 )

Back

PREV丨

Offline access controller, after inserting the card issuer in the computer and installing the driver, the FCARD3500T software writes the setting card and prompts that the card issue...

NEXT丨

I took a batch of FC-185M card readers, among them, there are multiple card readers that can read the card number sometimes, and sometimes cannot read the card number, what is the c...