FC-A01E/M Fingerprint Card Reader

FC-A01 fingerprint card reader is a fingerprint card reader device that integrates fingerprint + card reader. It is responsible for reading and collecting fingerprint information and sending the access control board. It has no personnel data processing capability and is only used for card reader and fingerprint collection. FC-A01 sends the fingerprint information to the access control board via RS485.

Product Parameters

Model: FC-A01E/M

Working Temperature: 0-70°C

Working Humidity: 20-80%

False Recognition Rate: < 0.0001%

Rejection Rate: < 0.01%

Working Voltage: DC12V (9-14V)

Verification Mode: 1:N, 1:1

Working Mode: Fingerprint Card Reader

Registration Way: Fingerprint, Password, ID Card, (Mifare Card Optional)

Fingerprint Acquisition Area: 16 x 14 mm

The Acquisition Angle Range: ±45°

Confirm Response Time: < 1s

Communication Port: RS485

Size: 55 X 88 X 38mm

Product Introduction

FC-A01 Fingerprint Card Reader

FC-A01 fingerprint card reader is a fingerprint card reader device that integrates fingerprint + card reader. It is responsible for reading and collecting fingerprint information and sending the access control board. It has no personnel data processing capability and is only used for card reader and fingerprint collection. . FC-A01E sends fingerprint information to the access control board via RS485.

FC-A01 Fingerprint Card Reader

Product Advantage：

1. Living Fingerprints

2. High Speed Algorithms

3. Professional Fingerprint Reader

Wiring Diagram：

Accessories：

FC-A01E型指纹读卡器.jpg

Compatible with FCARD one card pass management system, support: unified management of access control, offline access control, time attendance access controller, guard tour, consumption machine, water controller, elevator access control board, parking lot system, etc., realizing a real one card pass system with one card and one library.